M-Press Copper Press Fittings Specification Sheet

Materials:

Formed components (fittings) material no.:                         CW024A according to EN 1254

Casting components (threaded fittings) material no.:      CC499K according to EN 1282



Guarantee:

Provided your M-Press Copper fittings have been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 30 years of trouble-free service and operation from your new system. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.



Applications:

A premium grade Copper fitting, designed for use with:

Drinking water (fully WRAS approved)

Purified water

Heating

Cooling water (chilled water)

Boosted cold water

Plant rooms

Steam condensate

Flammable gases classed and according to DVGW G 260 (HNBR Gas Approved Yellow seals)

Compressed Air, Argon, Nitrogen, Carbon Dioxide



Pressure and temperature ratings:

~ When used alongside fittings with EPDM seals for applications other than Compressed Air:

15-108mm:                        (PN16) 16bar                     -30deg C to +120deg C



~ When used alongside fittings with HNBR seals for applications involving flammable gasses:

15-108mm:                        (PN5) 5bar                          -20deg C to +70deg C



~ When used alongside fittings with EPDM seals for compressed air:

15-108mm:                        (PN16) 16bar                     -30deg C to +120deg C



Press tools:

All M-Press Copper fittings follow the popular ‘M’ profile and are therefore compatible with all ‘M’ profile tooling. 



Maintenance Free with potable water, other media follow instructions for that media.

M-Press Inox Press Fittings (Stainless Steel)



Materials:

Formed components (fittings) material no.:                         1.4404 according to EN 10088 /316L

Casting components (threaded fittings) material no.:      1.4408 according to EN 10283 /316L

Pipes material no.:                                                                          1.4404 according to EN 10312 (ECO 316L)



Guarantee:

Provided your M-Press Inox tube and fittings have been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 40 years of trouble free service and operation from your new system. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.



Applications:

A premium grade fitting that now includes 67mm into the range and designed for use with:

Drinking water (fully WRAS approved)

Purified water

Heating

Cooling water (chilled water)

Boosted cold water

Plant rooms

Steam condensate

Flammable gases classed and according to DVGW G 260 and G 262 (HNBR Gas Approved Yellow seals)

Compressed Air, Argon, Nitrogen, Carbon Dioxide



Pressure and temperature ratings:

~ When used alongside fittings with EPDM seals for applications other than Compressed Air:

15-22mm:           (PN40) 40bar                     -30deg C to +120deg C

28-35mm:           (PN25) 25bar                     -30deg C to +120deg C

42-108mm:        (PN16) 16bar                     -30deg C to +120deg C

~ When used alongside fittings with HNBR seals for applications involving flammable gasses:

15-108mm:        (PN5) 5bar                          -20deg C to +70deg C

~ When used alongside fittings with EPDM seals for compressed air:

15-108mm:        (PN16) 16bar                     -30deg C to +120deg C



Press tools:

All M-Press Inox (Stainless Steel) fittings follow the popular ‘M’ profile and are therefore compatible with all ‘M’ profile tooling. 



M-Press Inox Press Fittings Systems (Stainless Steel) and Copper Press Fittings and Pipes HNBR seals GAS



Stainless Steel System

Materials:

Formed components (fittings) material no.:                         1.4404 according to EN 10088 /316L

Casting components (threaded fittings) material no.:      1.4408 according to EN 10283 /316L

Pipes material no.:                                                                          1.4404 according to EN 10088 /316L

European Norm.

With DVGW certified product according to EN Classification above the system is verified as ‘Fit for Purpose’ in the UK awaiting European Standards.

Guarantee:

Provided your M-Press Inox fittings have been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 40 years of trouble free service and operation from your new system. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.

Applications:

A premium grade press fitting that now includes 67mm into the range and designed for use with:

Flammable gases classed and according to DVGW G 260 and G 262

Pressure ratings:

When installed for any application involving the use of gas, the pressure ratings are graded as follows:

15-108mm HNBR seals:                                PN5 (5bar)

Temperature ratings:

When a yellow HNBR ‘O’ Ring is present:

-20 deg C up to +70 deg C

Press tools:

All M-Press Inox (Stainless Steel) fittings follow the popular ‘M’ profile and are therefore compatible with all ‘M’ profile tooling. The fittings have not been independently tested with the ‘SA’ profile jaw and sling so it is recommended that these are not used. If you are in any doubt, please contact the number below and we will be happy to advise you.

M-Press Carbon Steel Pipes Zinc Coated Inside Outside

Specification Sheet

Materials:

Formed components (pipe) material no.:                              1.0034 according to EN 10346, int ext galv’d

Guarantee:

Provided your M-Press Carbon Steel fittings have been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 10 years of trouble-free service and operation from your new system. M-Press have one of the longest guarantees in the industry for Carbon Steel. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.

Applications:

A premium grade Carbon Steel pipe with a 10-year guarantee, designed for use with:

Heating (Closed Systems only)

Cooling water (chilled water – closed systems only)

Compressed air

Sprinkler systems (pressurised Systems only)

Pressure and temperature ratings:

~ When used alongside fittings with EPDM seals for applications other than Compressed Air:

15-108mm:                        (PN16) 16bar                     -30deg C to +100deg C

~ When used alongside fittings with EPDM/FKM seals for compressed air:

15-108mm:                        (PN16) 16bar                     -30deg C to +100deg C

~ When used for extinguishing water:

15-108mm:                        (PN16) 16bar                     -30def C to +100deg C

~ For fire extinguishers:

15-108mm:                        (PN16) 16bar                     -30deg C to +100deg C

Press tools:

All M-Press Carbon Steel fittings follow the popular ‘M’ profile and are therefore compatible with all ‘M’ profile tooling. 

M-Press Carbon Steel Pipes Zinc Coated Inside Outside

Specification Sheet

Materials:

Formed components (pipe) material no.:                              1.0034 according to EN 10346, int ext galv’d

Guarantee:

Provided your M-Press Carbon Steel fittings have been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 10 years of trouble-free service and operation from your new system. M-Press have one of the longest guarantees in the industry for Carbon Steel. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.

Applications:

A premium grade Carbon Steel pipe with a 10-year guarantee, designed for use with:

Heating (Closed Systems only)

Cooling water (chilled water – closed systems only)

Compressed air

Sprinkler systems (pressurised Systems only)

Pressure and temperature ratings:

~ When used alongside fittings with EPDM seals for applications other than Compressed Air:

15-108mm:                        (PN16) 16bar                     -30deg C to +100deg C

~ When used alongside fittings with EPDM/FKM seals for compressed air:

15-108mm:                        (PN16) 16bar                     -30deg C to +100deg C

~ When used for extinguishing water:

15-108mm:                        (PN16) 16bar                     -30def C to +100deg C

~ For fire extinguishers:

15-108mm:                        (PN16) 16bar                     -30deg C to +100deg C

Press tools:

All M-Press Carbon Steel fittings follow the popular ‘M’ profile and are therefore compatible with all ‘M’ profile tooling. 

M-Press MXL Press Fittings (Stainless Steel)

Materials:

Formed components (fittings) material no.:                         1.4404 according to EN 10088 /316L

Casting components (threaded fittings) material no.:      1.4408 according to EN 10283 /316L

Tube specification                                                                           1.4401 according to EN 10312 /316L

Guarantee:

Provided your M-Press Inox tube and fittings have been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 30 years of secured service and operation from your new system. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.

Applications:

Drinking water (fully WRAS approved)

Gas

Purified water

Heating

Cooling water (chilled water)

Boosted cold water

Plant rooms

Steam condensate

Industrial Oils

Compressed Air

Chemicals

Pressure and temperature ratings:

 When used alongside fittings with EPDM seals for applications.

168.3mm and 139.7mm: (PN16) 16bar   -30deg C to +120deg C

When used alongside fittings with FKM Viton Seals for Industrial and industrial gas application

168.3mm and 139mm:  (PN16) 16bar -30deg C to 200deg C.

For Natural Gas 139.7mm and 168.3mm (PN5) 5 bar -30deg C to + 70deg C

Press tools:

Novopress ACO401 to 168.3mm ONLY.

M-Press Inox Tube – Standard and ECO thin walled (Stainless Steel)

Materials:

Pipes material no.:          1.4404 according to EN 10312 (ECO 316L)

Guarantee:

Provided your M-Press Ilta Inox tube has been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 40 years of trouble free service and operation from your new system. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.

Applications:

A premium grade tube that now includes 67mm into the range and designed for use with:

Drinking water (fully WRAS approved)

Purified water

Heating

Cooling water (chilled water)

Boosted cold water

Plant rooms

Steam condensate

Flammable gases classed and according to DVGW G 260 and G 262

Compressed Air, Argon, Nitrogen, Carbon Dioxide

Markings M-Press from 15mm – 35mm and 67mm

Markings ILTA from 42mm -108mm (excluding67mm)

Pressure and temperature ratings:

When used alongside fittings with EPDM seals for applications other than Compressed Air:

15-22mm:           (PN40) 40bar                     -30deg C to +120deg C

28-35mm:           (PN25) 25bar                     -30deg C to +120deg C

42-108mm:        (PN16) 16bar                     -30deg C to +120deg C

When used alongside fittings with HNBR seals for applications involving flammable gasses:

15-108mm:        (PN5) 5bar                          -20deg C to +70deg C

When used alongside fittings with EPDM seals for compressed air:

15-108mm:        (PN16) 16bar                     -30deg C to +120deg C

Wall thicknesses (ECO):

15mm x 0.6mm, 22mm x 0.8mm, 28mm x 0.9mm, 35mm 67mm x 1.5mm

Wall thickness (Standard):

42mm – 7mm x 1.5mm. 76mm 108mm x 2.00mm

M-Press ‘Steam Press’ (Stainless Steel)



Materials:

Formed components (fittings) material no.:                         1.4404 according to EN 10088 /316L

Casting components (threaded fittings) material no.:      1.4408 according to EN 10283 /316L

Pipes material no.:                                                                          1.4404 according to EN 10312 (ECO 316L)

‘O’ Ring Material                                                                             FEPM Aflas Rubber



Guarantee:

Provided your M-Press Steam Press System fittings have been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 40 years of trouble free service and operation from your new system. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.



Applications:

Steam

Steam Condensate



Colour

Black



Pressure and temperature ratings:

~ When used alongside fittings with FEPM Aflas seals for applications other than Compressed Air:

15-108mm Stainless Press systems max temp 205’C constant, 230’C max peak.



Press tools:

All M-Press Inox (Stainless Steel) fittings follow the popular ‘M’ profile and are therefore compatible with all ‘M’ profile tooling. 



Tech info

Aflas is a copolymer of tetrafluoroethylene (TFE) and propylene also known as TFE/P.

Aflas is highly resistant to a wide range of chemicals such as acid and steam.



TechdocmMPF3625

01-03-2019



M-Press ‘O’ Ring Recommendations

Materials:

EPDM – Ethylene, propylene, diene, monomer rubber.

FKM -   Viton fluorocarbon.

HNBR - Hydrogenated nitrile, butadiene rubber.



Guarantee:

When fittings come with ‘O’ Ring Seals already installed they are guaranteed for the same length of time as the fittings.

When fitting to M-Press Fittings by a Third Party the ‘O’ Rings are guaranteed for the same length of time as the fittings but the fitting of the ‘O’ Ring Seal into the fitting guarantee is void if the seal is not inserted according to manufacturers recommendations and all precautions have not been taken to ensure no damage to the ‘O’ Ring Seal.

‘O’ Ring Installation:

If an ‘O’ Ring Seal needs to be replaced for any reason the following precautions must be taken to ensure safe and correct sealing of the seal.

Remove defective seal by using an ‘O’ Ring seal remover either plastic or metal.

Before inserting the new seal ensure that the profile for which the seal will sit is perfectly clean.

The ‘O’ Ring Seal can then be gently installed in the profile by hand, making sure no oil or chemicals come in contact.

When the seal is fitted use a very small amount of silicone lubricant.

When installed into the fittings make sure that the appropriate markings are on the fittings, Red for Viton, Yellow for Gas and Blue or No Markings for EPDM.

All ‘O’ Ring Seals from M-Press are approved by the National Bodies Testing Facilities WRAS, DVGW etc.

 

Markings M-Press from 15mm – 35mm and 67mm

Markings ILTA from 42mm -108mm (excluding 67mm)



Pressure and temperature ratings:

When used alongside fittings with EPDM seals for applications other than Compressed Air:

15-22mm:           (PN40) 40bar                     -30deg C to +120deg C

28-35mm:           (PN25) 25bar                     -30deg C to +120deg C

42-108mm:        (PN16) 16bar                     -30deg C to +120deg C



When used alongside fittings with HNBR seals for applications involving flammable gasses:

15-108mm:        (PN5) 5bar                          -20deg C to +70deg C



When used alongside fittings with EPDM seals for compressed air:

15-108mm:        (PN16) 16bar                     -30deg C to +120deg C



M-Press Aquagas Copper Press Fittings Specification Sheet

Materials:

Formed components (fittings) material no.:                         CW024A according to EN 1254

Casting components (threaded fittings) material no.:      CC499K according to EN 1282



Guarantee:

Provided your M-Press Copper fittings have been installed correctly and as per the installation guidelines set out by M-Press, you can enjoy 30 years of trouble-free service and operation from your new system. If you would like further information on training and installation techniques, please contact us on the number below, we will be delighted to assist you.



Applications:

A premium grade Copper fitting, designed for use with:

Natural and LPG Gas

Drinking water

Purified water

Heating

Cooling water (chilled water)

Boosted cold water

Plant rooms

Flammable gases classed and according to DVGW G 260 (HNBR Gas Approved Yellow seals)

Compressed Air, Argon, Nitrogen, Carbon Dioxide



Pressure and temperature ratings:

Water and heating fittings with HNBR seals.

15-28mm -20deg C to +95deg C (PN16) 16bar



~ When used alongside fittings with HNBR seals for applications involving flammable gasses:

15-28mm:                           (PN5) 5bar                          -20deg C to +70deg C

Press tools:

All M-Press Copper fittings follow the popular ‘M’ profile and are therefore compatible with all ‘M’ profile tooling with exception hand manual tooling. 



Unipress Technical Data



Technical data system pipe MPRESS UNIPRESS ML-PIPE

The five layer system pipe MPRESS UNIPRESS ML-PIPE is a temperature resistant polyethylene pipe with



Aluminium core (PE-RT/AL-PE-RT).



Pipe design:

1.      Layer    internal pipe PE-RT type II, DIN 16833

2.      Layer    adhesive layer

3.      Layer    butt-welded aluminium layer

4.      Layer    adhesive layer

5.      Layer    external layer PE-RT type II or heat-resistant PE



The MPRESS UNIPRESS ML-PIPE is suitable for drinking water, it is gastight, corrosion-free, chemical- resistant, deposit free, flexible, and dimensionally stable.

The pipe can be delivered as an insulated pipe. Insulation thicknesses 6mm to 20mm according to size. MPRESS UNIPRESS ML-PIPE can also be delivered as a pipe in pipe system drawn in corrugated protective pipe.

Length: rolls á 50m, 100m or 200m or bars á 5m. Dimensions: DN 16 bis 32mm.



More details in booklet